Friday, December 16, 2016

Ribbon Wrapped Embroidery Hoop Tutorial


This simple cardinal cross stitch quickly became a fun project to make! I learned a lot about wrapping ribbon around the embroidery hoop through trial and error. Now I can't wait to make more finished cross stitch projects like this!

Disclosure: This post may contain affiliate links for your convenience. 

To make this project, you'll need: 
DMC Embroidery Floss (666, 352, 437, and 310)

I started out by practicing a few wraps around the hoop with the ribbon. Once I liked the placement, I glued the beginning piece of the ribbon to the inside of the outer hoop, near the opening. 


You'll want to space the ribbon apart, so it is not too thick, otherwise when you place the cloth between the two hoops, you won't be able to close it.


You'll also want to make sure the ribbon is not bunched up in places. It should be smooth and tight around the hoop.


Once you reach the other end of the hoop, glue the underside of the ribbon to the hoop. I closed the hoop with the screw and then debated how to create a bow and some way to hang it.

I then fitted the aida cloth into the hoop and trimmed the excess fabric. Go ahead and use fray check glue if you are worried about the cloth fraying. If it's tight in the hoop and you don't expect it to be taken out, I wouldn't worry about it. You could also use glue to secure it to the hoop, but that may damage or discolor the fabric. I did not use either.

I ended up wrapping the ribbon around the screw, looped the ribbon to about 3 inches, and then created a folded bow in the front, right above the screw. I did add a small dot of glue between the bow and the loop to keep it from slipping. I tucked the end of the ribbon underneath the middle of the bow and secured it with glue.


And there you have it! Super easy! This project took about 1 and a half hours to stitch, and another hour to finish. 

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...